Plastic-inks are composed of micro porous plastic material in which the ink is injected during the manufacturing process. This material diffuses the ink function of the need and is adapted to the most
Plastic-inks are designed to print on:
Porous materials (paper, carton, wood …) on which it dries instantaneously by absorption.
Mid-absorbent substrates such as glazed paper, varnished or treated metal, plastics…
Plastic-inks present numerous advantages:
Possibilities of mounting on all marking devices.
Excellent results in all positions, to mark on the side, the top or the bottom of the packing case
No handling of liquid inks
Very long useful life; it is function of the use conditions (characters size, length of text, kind of substrate, printing rate, and roller.)
Two kinds of plastic-inks
RX model recommended for the marking:
On most absorbent substrates
With large characters
RX model allows very high printing rates thanks to an excellent ink exudation.
PS model recommended for the marking:
On mid-absorbent substrates
With small characters or for a very precise printing.
PS model also allows very high printing rates
Selection board of the Plastic-inks
Absorbent substrates Mid-Absorbent substrates
Large characters RX model PS model
Small characters PS model PS model
And precise printing
Our Standard Size available in stock
OD x ID x Length
|Easipack EPK-25 or other machines
Easipack EPK-50 or other machines
Easipack EPK-84 or other machines
Easipack EPK-100 or other machines
Easipack EPK-135 or other machines
Easiroll Model A or other machines
Easiroll Model B or other machines
Easiroll Model C or other machines
|60 x 25 x25 mm.
60x 25 x 50 mm.
60 x 25 x 80 mm.
60 x 25 x 100 mm.
60 x 25 x 135 mm.
50 x 6.25 x 38 mm.
50 x 6.25 x 75 mm.
60 x 25 x 115 mm
60 x 25 x 320 mm.
60 x 25 x ON mm.